The AccessWare software is available in two configurations, both of which function as the interface to the AccessSwitch products. They are the AccessWare Local Management Software (LMC) and AccessWare Network Management Software (NMC). These software packages enable provisioning, control and management of your AccessSwitch.

All AccessWare software operates on Microsoft Windows operating systems. AccessWare Local and Network Management Software (LMC/NMC) enables switch operators to create configuration profiles and provision network access lines on the AccessSwitch. This software also tracks system alarms, administers system security and provides a window for protocol analysis using the Q.931 and Q.921 protocols.

AccessWare Local Management Software (LMC)
Included with each AccessSwitch is local management software (LMC) that allows a laptop or desktop computer to be connected directly to the switch. This software can perform call trace analysis and it offers snapshots of active calls on the switch for easy network analysis. This version of the software enables a computer to connect to one switch for configuration, management and control. Management and control of multiple switches requires the (NMC) version of the software.

AccessWare Network Management Software (NMC)
This version of the software enables management of entire networks (up to 25 separately configured switching platforms). The interface is identical to the local management software (LMC) version but it enables an operator to remotely access and manage multiple switches. Modem or IP access can be used with this software.

Technical Support and Product Availability
TKO specializes in support and maintenance of mission critical communications networks. In both live communications networks and laboratories, TKO offers technical support and diagnostic assistance for AccessSwitches. TKO maintains a large inventory of frames, cards and both new and refurbished parts for all AccessSwitches. Contact us for availability and further information.

AccessWare System Software for AccessSwitch 20
The AccessWare software for the AccessSwitch 20 include the following features:

• Call-by-call routing by: dialed digits, number translation, dialed digit substitution, network service type, trunk groups, auto retry, min/max bandwidth management, and automatic number identification (ANI)
• Signal translation:
  -Inbound: PRI to T1, PRI to BRI, BRI to T1, BRI to PRI.
  -Outbound: PRI to T1, PRI to BRI, BRI to T1, BRI to PRI
• Call-by-call dial plans: private to public, public to private, on-net to off-net, off-net to on-net
• Simultaneous support of multiple carriers: AT&T, MCI, Sprint, LEC PRI/BRI
• Inverse multiplexing and BONDING Mode 1 for all high-speed synchronous data ports and ISDN basic rate ports; H0 network service support
• Signaling protocols supported:
  - AT&T 5ESS, AT&T 4ESS,
  - NTI DMS100, NTI DMS250,
  - T1 A/B robbed bit dial pulse and DTMF,
  - BRI, PRI, Euro ISDN NET5 (PRI),
  - Switched 56/64, Switched 384/1536,
  - AT&T SDN/SDDN,
  - National ISDN-1,
  - ISDN Multirate H0

AccessWare Software for AccessSwitch 60 and 200
The AccessWare software for the AccessSwitch 60 and 200 include the following features:

• Simultaneous support of multiple carriers: AT&T, MCI, Sprint, LEC PRI I/BRI
• Call-by-call dial plans: private to public, public to private, on-net to off-net, off-net to on-net
• Call-by-call switching between any and all network trunks and ports
• Call-by-call routing by: dialed digits, number translation, dialed digit substitution, network service type, trunk groups, auto retry, min/max bandwidth management, and automatic number identification (ANI)
• BRI Multipoint (with SPID) and BRI Point-to-Point; AT&T Custom non-initializing service
• Inverse multiplexing and BONDING Mode 1 for all high-speed synchronous data ports
• Signal translation:
  - Inbound:
      PRI to T1
      PRI to BRI
      BRI to T1
      BRI to PRI
  - Outbound:
      PRI to T1
      PRI to BRI
      BRI to T1
      BRI to PRI
      RS366 to T1
      RS366 to PRI
      RS366 to BRI
      V.25 bis to T1
      V.25 bis to PRI
      V.25 bis to BRI
• Signaling protocols supported:
  - AT&T 5ESS, AT&T 4ESS
  - NTI DMS100, NTI DMS250
  - T1 A/B robbed bit dial pulse and DTMF
  - NTT INS Net 64, NTT INS Net 1500
  - Euro ISDN NET3 (BRI), Euro ISDN NET5 (PRI)
  - Switched 56/64, Switched 384/1536
  - AT&T SDN/SDDN, Accunet Spectrum Digital
  - MCI Virtual Network, MCI VPDS
  - Sprint VPN, Sprint Dial 1 Digital
  - National ISDN-1, ISDN Multirate H0
  

TKO Video Communications
TKO provides outsourcing, equipment, services and technical support for local, national and global video conferencing networks. We also offer satellite broadcasting, audio conferencing and training for the video conferencing and telecommunications industries. TKO Video Communications distinguishes itself from other vendors by providing high quality video conference outsourcing, video products, and communications solutions with unparalleled attention to customer objectives.

PCS-TL50 | PCS-11 | Meetings
Tandberg 1000 | 7000 | Conference Tables | Cart | Group Metings